Post-Earthquake Stability and Rehabilitation of Mountain Trails (‘Unnat Goreto’) in Gorkha and Rasuwa Districts, Nepal
DOI:
https://doi.org/10.64862/Keywords:
Mule Track, Stability analysis, Safety factor, Finite element method, EarthquakeAbstract
This study evaluates the stability of 2017-rehabilitated Unnat Goreto trails in Gorkha and Rasuwa, Nepal, post-2015 Mw 7.8 earthquake, using 2D FEM in Rocscience Phase2 with SRM (Mohr–Coulomb and Hoek–Brown) under static and pseudo-static (EQx = 0.1 g) loading. The Gorkha trail is stable statically, marginally safe at 0.1 g, but unstable under higher seismic loads, while Rasuwa trails are more stable. Soil-bioengineering measures and dry stone retaining walls (Types 1–3), along with mule loads and track components, enhanced the factor of safety, emphasizing integrated geotechnical, bioengineering, and structural interventions for long-term stability in seismically active mountainous regions.
References
Department of Local Infrastructure Development and Agricultural Roads (DoLIDAR), Government of Nepal (GoN). (2010). Revised norms: Working norms for agricultural and rural roads.
Department of Roads (DoR), Government of Nepal (GoN). (2007). Roadside Geotechnical Problems: A Practical Guide to Their Solution. GoN/DoR.
Griffiths, D., & Lane, P. (1999). Slope stability analysis by finite elements. Géotechnique, 49(3), 387–403.
Hoek, E., & Diederichs, M. (2006). Empirical estimation of rock mass modulus. International Journal of Rock Mechanics and Mining Sciences, 43, 203–215.
Krahenbuhl, J., & Wagner, A. (1983). Survey, design, and construction of trail suspension bridges for remote areas. SKAT, Swiss Center for Appropriate Technology, St. Gallen, Switzerland.
Matsui, T., & San, K. C. (1992). Finite element slope stability analysis by shear strength reduction technique. Soils and Foundations, 32(1), 59–70.
Minnesota Department of Natural Resources. (2006). Trail Planning, Design, and Development Guidelines: Shared Use Paved Trails, Natural Surface Trails, Winter-Use Trails, Bikeways. Trails and Waterways, Minnesota Department of Natural Resources.
Patton, F. D. (1966). Multiple modes of shear failure in rock. In Proceedings of the 1st Congress of the International Society for Rock Mechanics, Lisbon, Vol. 1, 509–513.
Pal, S., Kaynia, A. M., Bhasin, R. K., & Paul, D. K. (2012). Earthquake stability analysis of rock slopes: A case study. Rock Mechanics and Rock Engineering, 45, 205–215.
Popescu, M. E. (2001). A suggested method for reporting landslide remedial measures. IAEG Bulletin, 60(1), 69–74.
Rocscience Inc. (2012). Phase2: A 2D Finite Element Program for Calculating Stresses and Estimating Support around Underground Excavations. Geomechanics Software and Research, Rocscience Inc., Toronto, Canada. Retrieved from www.rocscience.com
Trail Design Guidelines. (2009). Regional Trails, Natural Areas and Developed Parks. PP&R Trail Guidelines Coordination Team, Portland Parks & Recreation, Portland, Oregon. Retrieved from www.PortlandParks.org
U.S. Department of Agriculture (USDA). (1984). Standard Specifications for Construction of Trails. USDA Forest Service Engineering Staff, June 1984.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Nepal Society of Engineering Geology (NSEG)
This work is licensed under a Creative Commons Attribution 4.0 International License.
